| 版本 | 修改日期 | 修改内容 | 修订人 |
|---|---|---|---|
| 1.0 | 2024-11-28 | 创建文档 | Albert |
屏幕文件需要进入图片更换模式并且使用转换后的文件进行替换，请根据以下步骤进行操作：
① 准备一张分辨率大于等于128x128且宽高比为1:1的GIF图像。
② 访问http://convert.iatkb.com，并找到如下所示的‘For CP 3.3, MRTAXI, Navi and Corsa’部分。
③ 上传您的图像，等待加载完成，然后下载转换后的.crs文件。
④ 将键盘连接到计算机，按下F24键（请查看IV-1查找键位），以进入图像更换模式。
⑤ 进入图像更换模式后，屏幕会关闭，但您仍然可以正常输入，此时将会连接一个U盘到计算机上。
⑥ 打开U盘，删除原始图像文件，将新图像文件复制进去。再次按下F24键以退出图像更换模式。屏幕将自动重启，显示新图像，表示更换完成。
⚠️注意：如果您使用的是Mac OS，在退出图像更换模式前，请务必删除系统废纸篓内的原始文件，否则可能会导致U盘内的存储空间无法释放。
To customize your screen image, access the picture replacement mode by following these steps:
① Prepare a GIF image with a resolution of 128x128 or higher and a 1:1 aspect ratio.
② Visit http://convert.iatkb.com and select the 'For CP 3.3, MRTAXI, Navi and Corsa' section.
③ Upload your picture, wait for it to load, then refresh the website to download the converted .crs file.
④ Connect the keyboard to your computer and press F24 (refer to IV-1 for the key's location) to enter picture replacement mode.
⑤ While in picture replacement mode, the screen will turn off, but the keyboard remains operational. You'll also see a U disk connected to your computer.
⑥ Open the U disk, delete the original picture file, and copy the new picture file. Press F24 again to exit picture replacement mode. The screen will automatically restart, displaying the new image, indicating the replacement is complete.
⚠️ Note: If you're using Mac OS, be sure to delete the original files from the system trash can before exiting picture replacement mode, or the storage space on the U disk won't be released.
