请各位务必遵循步骤完成组装。 Plz follow the instruction to finish the build.
版本 | 修订日期 | 说明 | 修订人 |
---|---|---|---|
V 1.0 | 2022-09-23 | 创建文档 | Albert |
V 2.0 | 2022-10-15 | 补充细节 | Albert |
V 2.1 | 2022-10-28 | 补充部分英文翻译 | Albert |
V 3.0 | 2022-10-31 | 新增几种屏幕显示模式 | Albert |
V 3.1 | 2023-11-27 | 上传新固件,优化了图片播放 | Albert |
本次IM+ Meta包装分为两个部分:Case pack 和 PCB pack。请根据以下清单核对是否有物品遗漏。
The IM+ Meta packages is divided to two parts: Case pack and PCB pack. Please check for missing items against the list below.
所含物品 Item | 数量 Quantity | 说明 Comment |
---|---|---|
键盘主体 | ||
Keyboard | 1 | - |
底部硅胶垫 | ||
Inner silicone foam | 1 | - |
Type-C子板 | ||
Type-C daughterboard | 1 | - |
所含物品 Item | 数量 Quantity | 说明 Comment |
---|---|---|
定位板 | ||
Plate | 1 | - |
PCB | 1 | - |
3mm 轴间垫 | ||
3mm Plate foam | 1 | - |
0.5mm 轴下垫 | ||
0.5mm PE foam | 1 | - |
0.5mm 1u轴下垫 | ||
0.5mm 1u PE foam | 3 | 用于焊接PCB的分裂右Shift |
Using for split right Shift | ||
额外脚垫 | ||
Extra bumpons | 6 | - |
Top mount定位板螺丝硅胶垫片 | ||
Top mount plate silicon screw gasket | 8 | - |
定制定位板螺丝 | ||
Special plate screws | 8 | - |
额外的M3 *8外壳螺丝 | ||
Extra case screw | 2 | 一颗银色,一颗黑色 |
Silver *1, Black *1 | ||
侧面装饰件快拆硅胶套 | ||
Side accent piece silicon gasket | 2 | - |
侧面装饰件快拆插针 | ||
Side accent piece pin | 2 | - |
沉头 m2 *3 热插拔固定螺丝 | ||
Countersunk head m2 *3 hot-swap fixing screws | 9 | 仅热插拔内胆包含 |
Only hot-swap pcb included | ||
平头 m2*3 热插拔固定螺丝 | ||
Flat head m2*3 hot-swap fixing screws | 9 | 仅热插拔内胆包含 |
Only hot-swap pcb included | ||
热插拔固定螺丝柱子 | ||
Screw socket for fixing hot-swap pcb and plate | 9 | 仅热插拔内胆包含 |
Only hot-swap pcb included | ||
10cm JST线 | ||
10cm JST cable | 1 | 用于连接 Type-C 子板和主 PCB |
Using for connecting the daugther board and main pcb. |
检查键盘外观是否有运输过程中造成的划痕以及损伤,请务必在物流签收后三天内完成此步,超过三天后将不再提供免费售后。
如有问题可通过 QQ 联系 125030667 或 453811958。
Check the appearance of the keyboard for scratches and damages caused during transportation. Please be sure to complete this step within three days after the logistics sign. After three days, no free after-sales service will be provided.