版本 | 修改日期 | 修改内容 | 修订人 |
---|---|---|---|
1.0 | 2024-01-17 | 创建文档 | Albert |
1.1 | 2024-03-11 | 修改 | Albert |
Macro Pad除了可以直接连接电脑使用外,还可以作为串联其他的Matrix键盘一起使用。
- 主PCB上的两个接口与Type-C小板上的3个接口连接。
- 同时最多可连接两个,分别用作连接电脑和串联键盘使用。
- 与Type-C小板连接无固定顺序,请根据自己习惯选择连接方式。
The Macro Pad can be used not only by directly connecting it to a computer but also by daisy-chaining with other Matrix keyboards.
- The two interfaces on the main PCB are connected to the three interfaces on the Type-C daughterboard.
- Up to two connections can be made simultaneously, with one each for connecting to a computer and daisy-chaining keyboards.
- There is no fixed order for connecting to the Type-C daughterboard; please choose the connection method according to your preference.
<aside> 💡 注意事项:
1. 串联的键盘仅支持Matrix Lab;
2. 串联后,电脑仅会识别Macro Pad一个设备,如果想在Vial中修改串联键盘的键位,请单独连接;
Precautions:
1. Only Matrix Lab keyboards are supported for daisy-chaining.
2. After daisy-chaining, the computer will only recognize the Macro Pad as one device. If you want to modify the key layout of the daisy-chained keyboards in Vial, please connect them individually.
</aside>
在浏览器中打开http://config.matrix-lab.com/并连接设备。
Open http://config.matrix-lab.com/ in your web browser and connect the device.
| 区域 Area | 说明 Description | | --- | --- | | 红色区域 Red area | 红色区域用于切换你当前要修改键位的层数,0层为最上一层即你最常用的一层。 Red area is used to switch the layer you want to modify. Layer 0 is the top layer, which is your most frequently used layer. | | 蓝色区域 Blue area | 蓝色区域展示此层当前的键位设置。 The blue area shows the current keymap configuration for this layer. | | 黄色区域 Yellow area | 黄色区域是提供的可修改的键位选项,在蓝色区域内选中一个键位然后再点击黄色区域内你想修改的键位即可完成修改。 The yellow area is the customizable key options. To make modifications, choose a key from the blue area and then click the key you wish to customize in the yellow area to complete the changes. |